Samsung SF6500 Service Manual page 89

Maintenance & Troubleshooting
7-2-3 Maintenance List
A number of reports can be printed from the fax
machine within the test mode. The protocol list
and memory dump list all contain detailed
information which may be required when
contacting technical support.
To printout the protocol and memory dump lists:
1. Get into the Tech mode by pressing MENU, #,
1, 9, 3, 4.
Sending/Receiving
PROTOCOL DUMP LIST
S/R FCF
S NSF
S CSI
S DIS
S NSF
S CSI
S DIS
R TSI
R DCS
S FTT
R TSI
R DCS
S CFR
R MPS
S MCF
S DCN
7-3 Remote Diagnostics and Control
Remote Diagnostics on the dex 825 is preformed
by a remote PC. The dex 825 has to be conditioned
o that remote PC can perform remote diagnostics.
1. Press MENU, One-touch 04 'SYSTEM SETUP'.
2. Press or until 'REMOTE DIAGNOSIS
PROTECTION ?' is displayed.
3. Press ENTER.
7-4
SAMPLE OF A PROTOCOL DUMP LIST
Facsimile Information Field
data described in hexdecmal code
Name of signal
(Facsimile Control Field)
FIF DATA
61005020003380140200001302090018010000
2020202020202020202020202O20202020202020
00000000 01110111 00010111 00100010
61005020003380140200001302090018010000
202020202020202020202022O202020220202020
00000000 01110111 00010111 00100010
2020202020202020202020202O20202020202020
00000000 01100001 00010101 00000000
2020202020202020202020202O20202020202020
00000000 01100001 00010101 00000000
2. In Tech mode, press MENU, and one-touch 16
'TX. CONFIRM'.
3. Press or repeatedly until you find the
Protocol Dump List. When you find
' PROTOCOL REPORT? ', press ENTER.
FIF data described
in ASCII code
AUG-20-94 06:35
ASCII
4. Press 1 for protection or press 2 to allow remote
diagnosis.
5. Press ENTER.
6. Press STOP to exit routine.
Samsung Electronics