Samsung SF6500 Service Manual page 16

Installation
Fax Port: This port is pre-configured to COM3 in
Windows 3.x and Windows 95. You can use the
SF6000 Series MFP as a fax modem by connecting
your Windows fax application to COM3. You only
need to change the configuration of the Fax Port if
the COM3 assignment is in conflict with your PC
hardware or software. You can select another
configuration of the Fax Port between COM3 and
COM8. When you change the Fax Port configuration
you will also need to reconnect your Windows fax
application to the new COM assignment. You must
restart Windows after you make changes to the Fax
Port configuration. The new assignment will become
effective when Windows restarts.
MONITOR
The MFP manager displays the status of SF6000
Series MFP ports when you press the Monitor
button. Active jobs are indicated by the word
'Active' in the Cable, Print, Scan, or Fax port. A
blinking dot also appears next to active port.
EXIT
The Exit button allows you to close the MFP
manager display or terminate the MFP manager.
The MFP manager will display a dialog box when
you press Exit. The dialog box has a Cancel and OK
buttons that mean the following:
Cancel button: This is the default button that you
would normally press to close the MFP manager
display and keep the MFP manager running in the
background. The MFP manager must be running in
the background when you want to use your SF6000
Series MFP.
3-8
OK button: This is the button you would press to
terminate the MFP manager. You do not want to
terminate the MFP manager under normal
circumstances. This button is provided for the case
when Windows requests that you terminate all
running programs. The MFP manager is a Windows
program that silently runs in the background all the
time.
If you decide to press the OK button then all
current and future SF6000 Series MFP usage will
be terminated until you restart the MFP manager,
or restart Windows.
You can restart the MFP manager from the Control
Panel menu at any time. Double click on the SF6000
Series MFP icon in Control Panel, press the Exit
button then press the Cancel button. The MFP
manager will silently run in the background and
you can use SF6000 Series MFP again.
UNINSTALL
The Uninstall button allows you to delete the SF6000
Series MFP software from your PC. When you press
the Uninstall button, the SF6000 Series MFP
manager will ask you to confirm that you want all
SF6000 Series MFP software files removed.
If you press the OK button then all of the SF6000
Series MFP files are removed from your PC.
Windows must be restarted when all of the SF6000
Series MFP software files are removed.
Samsung Electronics