Samsung SF6500 Service Manual page 45

Disassembly and Reassembly
6-24 HVPS Board
1. Before you disassemble the HVPS board, you
should remove :
♦ Right side cover (See page 6-10)
2. Unplug all the connectors and remove the four
screws from the HVPS board.
Figure 6.46
6-25 Paper Empty Sensor
1. Before you disassemble the sensor, you should
remove :
♦ Right side cover (See page 6-10)
2. Unplug the connector (H8) from the HVPS board
and release the connector wire by removing the
cover switch that ties the wires in a bundle.
6-16
3. Take out the board. Be careful when you unplug
the scan connector (H13) from the Mother board.
Figure 6.47
Figure 6.48
HVPS board
Cover switch
Samsung Electronics