Samsung SF6500 Service Manual page 15

4. Use the tabs to browse through the available
options.
After choosing print options, you are ready to
print.
CHOOSING PRINT OPTIONS FROM
WINDOWS CONTROL PANEL
1. In the Windows 'Main group' windows, double-
click the 'Control Panel' icon.
2. From the 'Control Panel', double-click the
'Printers' icon to open the 'Printers' dialog box.
3. From the list of installed printers, select the
'SF6000 Series MFP.'
4. Click the 'Setup' button to open the 'SF6000 Series
MFP' dialog box.
After choosing options, you are ready to print.
3-7-4 Using SF6000 Series MFP
Manager
The MFP manager configures and monitors the
operations of the SF6000 Series MFP. It is a
Windows program that silently runs in the
background all the time. You can open the MFP
Manager display by clicking on it's icon in the
Control Panel menu. You can also terminate the
MFP Manager at any time, if that is necessary. When
you exit the MFP Manager it will offer you two
options. One option is to terminate the SF6000 Series
MFP, and the other option is to keep the MFP
manager running in the background. If you decide
to terminate the MFP manager than all current and
future SF6000 Series MFP usage will be terminated
until you restart the MFP manager or restart
Windows. You can also restart the MFP manager
from the Control Panel menu at any time.
Samsung Electronics
CONFIGURE
Your SF6000 Series MFP can print, scan, and fax. It
appears to your Windows computer as three
separate peripherals: a Printer, Scanner, and a Fax
Modem. These three peripherals appear to be three
separate ports on the cable that attaches the SF6000
Series MFP to your computer. These three SF6000
Series MFP ports are configured automatically
during installation. The cable is also configured
automatically to attach to your computer's LPT1
during installation. However, you can change the
Cable, Print or Fax configuration by pressing the
Configure button.
Cable Port: This is the computer port to which you
connect the SF6000 Series MFP cable. It is configured
automatically to LPT1 during installation. LPT1 is
also configured automatically to use IRQ (7) and
DMA (channel 3) in Windows 3.x. You can connect
the SF6000 Series MFP cable to another LPT port on
your computer. You can also change the IRQ and
DMA assignments for the LPT port in Windows 3.x.
Please consult your computer hardware
documentation for the appropriate IRQ and DMA
assignments. You must restart Windows after you
make changes to the Cable Port LPT, IRQ, or DMA
configuration. The new assignments will become
effective when Windows restarts.
Print Port: This port is pre-configured to LPT3 in
Windows 3.x or LPT4 in Windows 95. You print
Windows documents on the SF6000 Series MFP by
connecting the SF6000 Series MFP printer driver to
this Print Port. You only need to change the
configuration of the Print Port if the LPT3 or LPT4
assignments are in conflict with your PC hardware
or software. You can select another configuration of
the Print Port between LPT2 and LPT9. When you
change the Print Port configuration you will also
need to open the Windows Printer Control and
reconnect the SF6000 Series MFP printer driver of
the new LPT assignment. You must restart
Windows after you make changes to the Print Port
configuration. The new assignment will become
effective when Windows restarts.
Scan Port: This port is pre-configured to COM9 in
Windows 3.x and Windows 95. Your SF6000 Series
MFP Scanner software is automatically configured
to connect to COM9. This assignment is fixed.
Installation
3-7