Samsung SF6500 Service Manual page 56

6-36 Transfer Bushing
1. Before you disassemble the Transfer bushing,
you should remove :
♦ Side covers (See page 6-10)
♦ Top cover (See page 6-11)
♦ Upper frame (See page 6-23)
♦ Transfer roller (See page 6-26)
2. Remove the bushings on the both ends of the
roller.
6-37 Developer Driver
1. Before you disassemble the Developer driver,
you should remove :
♦ Side covers (See page 6-10)
♦ Top cover (See page 6-11)
♦ Gear Z52/25 (See page 6-14)
2. Remove the two screws located next to the Gear
Z52/25. Then take out the Developer driver.
Samsung Electronics
2. Remove the bushings on the both ends of the
roller.
Figure 6.82
2. Remove the two screws located next to the Gear
Z52/25. Then take out the Developer driver.
Figure 6.83
Disassembly and Reassembly
Bushing
6-27