Samsung SF6500 Service Manual page 68

6-46-12 Pickup Roller
1. Before you disassemble the pickup roller, you
should remove :
♦ Solenoid (See page 6-36)
♦ Pickup clutch (See page 6-36)
♦ Dummy cassette (See page 6-38)
2. Pull the bushing on the left end of the pickup
roller slightly upwards and turn it in the
direction of arrow so that a hole on the bushing
aligns with the hole on the main frame, then
take it away from the roller. Then, take out the
pickup roller.
Figure 6.118
Samsung Electronics
6-46-13 SCF Connector
1. Before you disassemble the connector, you
should remove :
♦ Left side cover (See page 6-35)
2. Unplug the one connector from the PCB.
Remove the ground screw. Remove the two
screws securing the SCF connector and take out
the connector.
Figure 6.119
6-46-14 Cassette Holder
1. Before you disassemble the holder, you should
remove :
♦ Right side cover (See page 6-35)
2. Remove the spring. Turn the holder in vertical
and take it away from the frame.
Figure 6.120
Disassembly and Reassembly
6-39