6-9 Roll Pinch
1. Before you disassemble the Roll pinch, you
should remove :
♦ Scan unit (See page 6-1)
♦ OPE unit (See page 6-3)
2. Remove the five screws from the OPE unit.
Figure 6.17
6-10 Scan PBA
1. Before you disassemble the Scan PBA, you
should remove :
♦ Scan unit (See page 6-1)
2. Turn the Scan unit over and unplug all
connectors from the scan PBA.
Figure 6.19
Samsung Electronics
3. Turn the scan upper frame of the OPE unit over.
4. Remove the three screws and take out the spring
pinch. The roll pinch is separated.
Figure 6.18
3. Remove the one screw securing the Scan PBA
and take out the PBA.
Figure 6.20
Disassembly and Reassembly
Spring pinch
Roll pinch
6-7