Table of Contents
Advertisement
Installation
3-7 MFP Board (Option)
This board is required to upgrade this machine to use with PC for PC printing, scanning, and faxing.
1. Unpack the MFP box. It contains the MFP board,
Printer cable, screws, Installation Software
diskettes, and Installation manual.
2. Unplug the power cord.
3. Remove the two screws and take out the board
cover.
Figure 3.14
4. Unplug all the connectors from the board.
Figure 3.15
3-4
5. Remove the printer connector cover.
Figure 3.16
6. Insert the printer connector of the MFP board into
its place, then push down the MFP board so that
the P1 connector on the MFP board is properly
installed into the P3 connector on the main board.
Figure 3.17
Make sure the PCB supporter is also properly
inserted.
Insert the P1 connector
fully until it stops.
Figure 3.18
PCB supporter
Samsung Electronics
Advertisement
Table of Contents
