Samsung SF6500 Service Manual page 25

Paper Size-Select the paper size you will use for
the recording paper.
Press 1 for letter (LTR) or, 2 for A4 size paper.
If your machine is equipped with an optional lower
cassette, select the paper size for the lower cassette.
Press 1 for letter (LTR), 2 for A4, or 3 for legal (LGL)
size paper.
Message Confirmation Report-A confirmation
report shows whether the transmission was
successful or not, how many pages were sent, etc.
Press 1 to print out journal automatically each time
you send a fax.
Press 2 to print only when an error occurs and the
transmission was not successful.
Auto Print Journal-A journal report shows specific
information concerning transmission and reception
activities, the time and dates up to 50 of the most
recent transmission and reception.
Press 1 to print journal automatically after every 50
transmission and receptions.
Press 2 to print journal manually.
Remote Receive Start Code-The remote receive
code allows you to initiate fax receive from an
extension phone. If you pick up the extension phone
and hear fax tones, enter the remote receive code
and the fax will start receiving. The password is
preset to 9 at factory.
Enter the desired code 0 to 9 on the number keypad.
Power Save Mode-The power save mode allows
you to shut off the machine's printer heater
automatically after a document is printed, to
conserve electricity and reduce your utility bills. The
fax machine automatically turns on the printer again
when it receives a document or is instructed to make
a copy. In this mode, it takes the machine a little
longer to print out fax messages or copies since it
must first re-heat the printer.
Press 1 to turn this feature on. If you want to set the
time duration that the machine activates the power
save mode, enter the time in 24-hour format.
Press 2 to turn this feature off.
Samsung Electronics
Dial Mode-Select the type of dial system your fax
machine is connected to.
Press 1 if the fax machine is connected to a tone
(Touch Tone) dial line.
Press 2 if the fax machine is connected to a pulse
(Rotary) dial line.
Security Communication-This mode allows your
fax machine to send and receive documents to and
from a predetermined location where the fax
machine has the security code that matches your
security code.
Press 1 to turn on the Security Communication
mode.
Press 2 to turn off the Security Communication
mode.
Error Correction Mode-This mode compensates for
poor line quality and ensures accurate, error-free
transmission with any other ECM-equipped
facsimile machine. If the line quality is poor,
transmission time may be increased when ECM is
enabled.
Press 1 to turn on the error correction mode.
Press 2 to turn off the error correction mode.
Automatic Reduction in Receiving-When
receiving a document as long as or longer than the
paper installed in your machine, the machine can
reduce the data in the document to fit on your
recording paper size. The machine will reduce the
data in vertical. If you have an optional lower
cassette, your machine will automatically select the
cassette in which the desired-size paper is loaded.
Turn on this feature if you want to reduce an
incoming page that may otherwise need to be
divided into two pages with only a few centimeters
on the second page. If the fax machine cannot reduce
the data to fit into one page with the feature enabled,
the data is divided and printed in actual size on two
or more sheets if needed.
Press 1 to turn this feature on.
Press 2 to turn this feature off. The overflowed data
will be printed out on a second page.
Installation
3-17