Table of Contents
Advertisement
3. Press the release switch located on the right side.
Figure 6.49
4. Take out the Sheet sensor. Put a flat blade screw
driver or something under the sensor through
the hole on the right side of the machine and
push it up.
Figure 6.50
Samsung Electronics
5. Push up the bottom of the Paper empty sensor
and take it out.
Note: When you reassemble the Sheet cover, insert
Sheet cover
Disassembly and Reassembly
Figure 6.51
one end of the sensor in place and push until
you hear a click, then push the other end.
Figure 6.52
Paper Empty
Sensor
6-17
Advertisement
Table of Contents
