Table of Contents
Advertisement
6-32 Upper Frame
1. Before you disassemble the Upper frame, you
should remove :
♦ Side covers (See page 6-10)
♦ Top cover (See page 6-11)
2. Remove the one screw securing the ground wire
to the upper plate.
Figure 6.70
3. Unplug the connector (H9) from the HVPS
board. Release the connector wire by removing
the cover switch that ties wires in a bundle.
Figure 6.71
Samsung Electronics
HVPS Board
H9
Cover Switch
4. Press the release switch located on the right side.
Figure 6.72
5. Remove the E-ring and hinge bracket. Then push
the hinge shaft inwards and take it out.
6. Take out the upper plate.
Hinge Bracket
Hinge Shaft
E-ring
Figure 6.73
Disassembly and Reassembly
6-23
Advertisement
Table of Contents
