Control Panel - Ricoh 2105 Operating Instructions Manual

Control Panel

This illustration shows the control panel when options are installed.
{ { { { Status indicator} } } }
1.
Machine status is described by this indi-
cator. By default, this indicator is turned
off. You can select to light the status indi-
cator. For more information, see "Control
Panel", General Settings Guide.
{ { { { Check Modes} } } } key
2.
Press to check the current settings.
{ { { { Energy Saver} } } } key
3.
Press this key for about one second to be-
gin warm-up.
Pressing this key again while in warm-up
mode cancels warm-up.
Note
❒ This key is inactive while scanning or
setting scanner defaults.
{ { { { Clear Modes} } } } key
4.
Press to clear the current settings.
{ { { { Stop} } } } key
5.
Press to stop scanning.
{ { { { Start} } } } key
6.
Use to begin scanning, file storing, or de-
livery.
{ { { { Clear} } } } key
7.
Clears an entered numeric value.
{ { { { #} } } } key (Enter key)
8.
Use to enter a numeric value.
9.
Number keys
Use to enter numeric values.
Control Panel
ZJDS051N
1
7