Chapter 8 Replacement Of Other Modules; Replacement Of Other Modules - Mitsubishi Electric MELSEC L Series Manual

8

REPLACEMENT OF OTHER MODULES

8
8.1 Replacement of Other Modules
This section lists AnS series modules not introduced in previous chapters and describes their alternative
methods. The AnS series modules listed in this section require some special alternative methods
because there are no L series alternative models, or their functions and specifications differ from those
of L series modules.
Product
Pulse catch module
Temperature input module
Position detection module
Analog timer module
ID interface module
Memory card interface module
REPLACEMENT OF OTHER
8
MODULES
Model
A1SP60
A1S68TD
A1S62RD3N
A1S62RD4N
A1S62LS
A1ST60
A1SD35ID1
A1SD35ID2
A1SD59J-S2
Alternative method
Consider using the pulse catch function of the built-in I/O function of the
LCPU.
Consider using the CC-Link compatible temperature input module or
temperature control module as the temperature input module.
Or, consider using an analog input module by converting signals outside.
Consider using CC-Link compatible ABSOCODER
manufactured by NSD Corporation.
Consider using programming by indirect specification of the internal
timer.
There are no alternative models. Consider using our partner
manufacturer's products (Balluff ID system BIS M series), which can be
connected to Mitsubishi programmable controllers.
(System migration)
For details, refer to the technical bulletin (FA-A-0062).
Create a file register in a memory card or the standard RAM, and use the
file register as a substitute.
®
VE-2CC
8
- 1