Mitsubishi Electric MELSEC L Series Manual page 160

5
HEATING-COOLING TEMPERATURE CONTROL MODULE/TEMPERATURE
Address (hexadecimal)
CH1 CH2
3E 5E
3F 5F
AB AC
B1 B2
Point
Default values for the A series modules and L series modules may be different.
To apply an A series program using a default value to an L series module, review the program.
For details, refer to the user's manual for the L series module used.
5
- 45
CH3 CH4
7E 9E Self-tuning setting
7F 9F Self-tuning flag
A0 Mode setting for Alert alarm 1
A1 Mode setting for Alert alarm 2
A2 Mode setting for Alert alarm 3
A3 Mode setting for Alert alarm 4
A4 Alert dead band setting
A5 Number of alert delay
Heater disconnection/output off-time current error
A6
detection delay count
A7 Temperature rise completion range setting
A8 Temperature rise completion soak time setting
A9 PID continuation flag
AA Heater voltage correction setting
AD AE Reference heater current value
AF Transistor output monitor ON delay time setting
B0 CT monitor method switching
B3 B4 Control output monitor
B5 System area (Use prohibited)
B6 Cold junction temperature correction selection
B7 Control switching monitor
A1S64TCTRT(BW)
Name Read/write
R/W
R
R/W
R
–
R/W
R