A1S62Tctt(Bw)-S2 - Mitsubishi Electric MELSEC L Series Manual

5
HEATING-COOLING TEMPERATURE CONTROL MODULE/TEMPERATURE

5.2.5 A1S62TCTT(BW)-S2

Item
Control output
Number of temperature input points
Applicable temperature sensor
Indication accuracy
Cold junction Temperature process value:
temperature -100°C or more
Accu
compensation Temperature process value:
racy
accuracy -150°C to -100°C
(ambient
Temperature process value:
temperature:
-200°C to -150°C
0°C to 55°C)
Sampling cycle
Control output cycle
Input impedance
Input filter
Sensor correction value setting
Operation at sensor input disconnection
Temperature control method
PID constants setting
Proportional band (P)
PID constants range
Integral time (I)
Derivative time (D)
Set value (SV) setting range
Output signal
Rated load voltage
Maximum load current
Maximum inrush current
Transistor output
Leakage current at OFF
Maximum voltage drop at ON
Response time
2
Number of writes to E PROM
Insulation method
Dielectric withstand voltage
Insulation resistance
5
- 21
A1S62TCTT-S2
(Refer to Section 5.2.5 (1).)
(Ambient temperature: 25°C±5°C) Full scale × (±0.3%)±1 digit
(Ambient temperature: 0°C to 55°C) Full scale × (±0.7%)±1 digit
0.5s (Constant regardless of the number of channels used)
PID ON/OFF pulse or two-position control
Can be set by auto tuning or self-tuning.
Within the temperature range set for the temperature sensor to be used
0.1A/point, 0.4A/common
1.0VDC (TYP) at 0.1A
2.5VDC (MAX) at 0.1A
OFFON: 2ms or less, ONOFF: 2ms or less
Maximum 100000 times
Between the input terminal and programmable controller power supply: Transformer
Between input channels: Transformer
Between the input terminal and programmable controller power supply: 500VAC, for
Between input channels: 500VAC, for 1 minute
Between the input terminal and programmable controller power supply: 500VDC,
Between input channels: 500VDC, 10M or more
Specifications
A1S62TCTTBW-S2
Transistor output
2 channels/module
Within ±1.0°C
Within ±2.0°C
Within ±3.0°C
1 to 100s
1M
0 to 100s
-50.00 to 50.00%
Upscale processing
0.0 to 1000.0%
1 to 3600s
0 to 3600s
ON/OFF pulse
10.2 to 30.0VDC
0.4A, 10ms
0.1mA or lower
1 minute
10M or more