Mitsubishi Electric MELSEC L Series Manual page 137

5
HEATING-COOLING TEMPERATURE CONTROL MODULE/
L60TCTT4
Standard control: 4 channels/module
Heating-cooling control: 2 channels/module
(Refer to Section 5.2.5 (1).)
(Ambient temperature: 25°C±5°C) Full scale × (±0.3%)
(Ambient temperature: 0°C to 55°C) Full scale × (±0.7%)
(Refer to Section 5.2.5 (1).)
PID ON/OFF pulse or two-position control
Can be set by auto tuning or self-tuning.
Within the temperature range set for the temperature sensor to be used
0.1A/point, 0.4A/common
OFFON: 2ms or less, ONOFF: 2ms or less
12
Maximum 10 times (number of read/write from/to a non-volatile memory)
Between the input terminal and programmable controller power supply: Transformer
Between input channels: Transformer
Between the input terminal and programmable controller power supply: 500VAC, for 1
Between input channels: 500VAC, for 1 minute
Between the input terminal and programmable controller power supply: 500VDC,
Between input channels: 500VDC, 20M or more
Specifications
L60TCTT4BW
Transistor output
*1
Within ±1.0°C
*1
Within ±2.0°C
*1
Within ±3.0°C
1 to 100s
1M
0 to 100s
-50.00 to 50.00%
Upscale processing
0.0 to 1000.0%
0 to 3600s
0 to 3600s
ON/OFF pulse
10 to 30VDC
0.4A 10ms
0.1mA or lower
1.0VDC (TYP) at 0.1A
2.5VDC (MAX) at 0.1A
minute
20M or more
: Compatible, : Partial change required, ×: Incompatible
Compatibility
*1
*1
Precautions for replacement
The standard control and heating-
cooling control can be combined in
the L series module.
5
- 22