Sub Setting Mode - Panasonic KT4R User Manual

7.2 Sub Setting Mode

To enter Sub setting mode, press the
Use the or
To register the set data, use the
Explanation of setting items:
• Upper left: PV Display: Indicates setting characters.
• Lower left: SV Display: Indicates factory default value.
• Right side: Indicates the setting item, explanation of its function and setting range (or selection item).
Setting characters
[37]
Factory default value
Setting item numbers such as [37], [38] are the same as those on Section "14. Key Operation Flowchart"
(p.131).
Characters,
Factory Default
[37]
[38]
[39]
[40]
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
and
key for settings (or selections).
key.
Setting item name, function, setting range (or selection item)
AT/Auto-reset Perform/Cancel
• Selects AT or 'AT on startup' Perform/Cancel in PID control action, or Auto-reset
Perform/Cancel in P or PD control action.
Setting Item, Function, Setting Range
AT/Auto-reset Perform/Cancel
• Selects AT or 'AT on startup' Perform/Cancel in PID control action, or Auto-reset
Perform/Cancel in P or PD control action.
Refer to Sections '8.5 Setting PID Constants (by Performing AT)' (p.70), and
'8.6 Performing Auto-reset' (p. 73).
• Selection item:
AT/AT on startup/Auto-reset Cancel
AT Perform
'AT on startup' Perform
Auto-reset Perform
Not available for ON/OFF control or PI control.
OUT1 proportional band
• Sets OUT1 proportional band.
• Setting range: 0 to Input span
DC voltage, current inputs: 0.0 to 1000.0%
OUT1 becomes ON/OFF control when set to 0 or 0.0.
Integral time
• Sets the integral time.
Auto-reset can be performed when PD is control action (I = 0).
• Setting range: 0 to 3600 seconds
Setting the value to 0 disables integral action.
Not available if OUT1 is in ON/OFF control.
Derivative time
• Sets the derivative time.
• Setting range: 0 to 1800 seconds
Setting the value to 0 disables derivative action.
Not available if OUT1 is in ON/OFF control.
keys (in that order) together in RUN mode.
( )