Indicating Mv, Remaining Time (Program Control) - Panasonic KT4R User Manual

8.9 Indicating MV, Remaining Time (Program Control)

In Fixed value control and Program control, MV and remaining time are indicated.
To indicate MV, press and hold the
The unit enters Monitor mode, and indicates MV.
While MV is indicating, the decimal point flashes.
While in Standby (Program control waiting) mode of Program control, the unit cannot move to Monitor
mode.
In Monitor mode, the following contents are switched every time the
the model number.
Model Number
KT4R
KT8R, KT9R
(*) For the KT8R, KT9R, step number (Program control) is indicated in the STEP Display.
Indicating MV, Remaining time
Power ON
RUN mode
PV/SV Display
(3 sec)
Monitor mode
Indicates MV. (e.g.) MV: 7.2% (Decimal point flashes.)
Remaining time (Program control RUN)
(e.g.) Remaining time 0:30
Step number (Program control RUN) (KT4R)
(e.g.) Step 1
RUN mode
PV/SV Display
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
key for approx. 3 seconds in PV/SV Display.
Fixed value control Indicates only MV.
Program control Indicates MV, Remaining time, Step number (in that order).
Fixed value control Indicates only MV.
Program control Indicates MV, Remaining time (in that order).
key is pressed depending on
Indicated Contents
(*)
(*)