Panasonic KT4R User Manual page 80

Step 5 time [23]
or
Set to 2:00.
Step 5 wait value [24]
or
Set to 0 .
(Many times) or
RUN mode
Standby (program control waiting) mode
Now, selection is complete.
Program control RUN
To perform Program control, press and hold the
control waiting) mode.
Program control starts using the start type selected in [Program control start type].
While Wait function is working, the PV Display flashes.
Program control STOP
To stop Program control, press and hold the
Program control will stop, and the unit will revert to Standby (Program control waiting) mode.
Proceeding to the next step during Program control (Advance function)
By pressing the
interrupted, proceeding to the next step. (Advance function)
While Wait function is working, the Wait function is cancelled, and proceeds to the next step.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
(3 sec)
key for approx. 1 second during Program control, the performing step is
key for approx. 1 second in Standby (program
key for approx. 1 second during Program control.