Panasonic KT4R User Manual page 43

Characters,
Factory Default
[13] SV2
• Sets SV2.
• Corresponds to [SV2] in Initial setting mode.
If Program control is selected in [OUT/OFF key function], this will become Step 2
SV.
• Setting range: Scaling low limit to Scaling high limit
Available only when Program control is selected in [OUT/OFF key function].
Step 2 time
[14]
• Sets Step 2 time.
• Setting range:
If
using Step 2 SV.
Available only when Program control is selected in [OUT/OFF key function].
[15] Step 2 wait value
• Sets Step 2 wait value.
• Setting range: 0 to Converted value of 20% of the input span
DC voltage, current inputs: 0 to Converted value of 20% of scaling span
Setting the value to 0 disables Wait function.
Available only when Program control is selected in [OUT/OFF key function].
[16] SV3
• Sets SV3.
• Corresponds to [SV3] in Initial setting mode.
If Program control is selected in [OUT/OFF key function], this will become Step 3
SV.
• Setting range: Scaling low limit to Scaling high limit
Available only when Program control is selected in [OUT/OFF key function].
Step 3 time
[17]
• Sets Step 3 time.
• Setting range:
If
using Step 3 SV.
Available only when Program control is selected in [OUT/OFF key function].
[18] Step 3 wait value
• Sets Step 3 wait value.
• Setting range: 0 to Converted value of 20% of the input span
DC voltage, current inputs: 0 to Converted value of 20% of scaling span
Setting the value to 0 disables Wait function.
Available only when Program control is selected in [OUT/OFF key function].
(*1) The placement of the decimal point follows the selection.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Setting Item, Function, Setting Range
, or 00:00 to 99:59
is set, Step 2 time will be held, and Fixed value control will be performed
, or 00:00 to 99:59
is set, Step 3 time will be held, and Fixed value control will be performed
(*1)
(*1)
(*1)
(*1)