Panasonic KT4R User Manual page 125

Characters,
Factory Default
EV1 alarm hysteresis
EV1 alarm delay time
EV1 alarm Energized/De-energized
TS1 output step number
TS1 OFF time
TS1 ON time
Event output EV2 allocation
EV2 alarm value 0 Enabled/Disabled
(*1) The placement of the decimal point follows the selection.
(*4) Time unit follows the selection from [Step time unit].
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Setting range: 0.1 to 1000.0
DC voltage, current inputs: 1 to 10000
Setting range: 0 to 10000 seconds
Energized
De-energized
Setting range: 1 to 9
Setting range: 00:00 to 99:59
Setting range: 00:00 to 99:59
[Event Output Allocation Table]
No event
Alarm output, High limit alarm
Alarm output, Low limit alarm
Alarm output, High/Low limits alarm
Alarm output, High/Low limits independent alarm
Alarm output, High/Low limit range alarm
Alarm output, High/Low limit range independent alarm
Alarm output, Process high alarm
Alarm output, Process low alarm
Alarm output, High limit with standby alarm
Alarm output, Low limit with standby alarm
Alarm output, High/Low limits with standby alarm
Alarm output, High/Low limits with standby independent
alarm
Loop break alarm output
Time signal output
Output during AT
Pattern end output
Output by communication command
Heating/Cooling control relay contact output
Disabled
Enabled
Setting Item, Setting Range
( ),
(*1)
(*4)
(*4)