Panasonic KT4R User Manual page 58

Characters,
Factory Default
[A] EV2 alarm value 0 Enabled/Disabled
• When EV2 alarm value is 0 (zero), alarm action can be Enabled or Disabled.
Corresponds to [EV2 alarm value 0 Enabled/Disabled] in Initial setting mode.
• Selection item:
Available only when Event output EV2 is specified.
Available when
independent alarm),
limits with standby independent alarm) are selected in [Event output EV2 allocation].
[B] EV2 alarm value
• Sets EV2 alarm value.
Corresponds to [EV2 alarm value] in Initial setting mode.
EV2 alarm value matches EV2 low limit alarm value in the following cases:
High/Low limit range independent alarm), or
limits with standby independent alarm) is selected in [Event output EV2 allocation].
• Setting range:
High limit alarm
Low limit alarm
High/Low limits alarm
High/Low limits independent
alarm
High/Low limit range alarm
High/Low limit range
independent alarm
Process high alarm
Process low alarm
High limit with standby alarm
Low limit with standby alarm
High/Low limits with standby
alarm
High/Low limits with standby
independent alarm
Available only when Event output EV2 is specified.
Available when any alarm from
limits with standby independent alarm) is selected in [Event output EV2 allocation].
[C] EV2 high limit alarm value
• Sets EV2 high limit alarm value.
This value is available only for the following cases:
output, High/Low limit range independent alarm), or
High/Low limits with standby independent alarm) is selected in [Event output EV2
allocation].
Corresponds to [EV2 high limit alarm value] in Initial setting mode.
• Setting range: Same as those of EV2 alarm value
Available only when Event output EV2 is specified.
(*1) The placement of the decimal point follows the selection.
(*2) For DC voltage, current inputs, the input span is the same as the scaling span.
(*3) For DC voltage, current inputs, input range low (or high) limit value is the same as scaling low (or high) limit value.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Setting Item, Function, Setting Range
Disabled
Enabled
(Alarm output, High limit alarm) to
(Alarm output, High limit with standby alarm) to
(Alarm output, High/Low limits independent alarm),
-(Input span) to Input span
-(Input span) to Input span
0 to Input span
0 to Input span
0 to Input span
0 to Input span
Input range low limit to Input range high limit
Input range low limit to Input range high limit
-(Input span) to Input span
-(Input span) to Input span
0 to Input span
0 to Input span
(Alarm output, High limit alarm) to
(Alarm output, High/Low limits independent alarm),
(Alarm output, High/Low limit range
(Alarm output, High/Low
(Alarm output,
(Alarm output, High/Low
( )
(*1) (*2)
( )
(*1) (*2)
( )
(*1) (*2)
( )
(*1) (*2)
( )
(*1) (*2)
( )
(*1) (*2)
( )
(*1) (*2)
( )
(*1) (*2)
( )
(*1) (*2)
( )
(*1) (*2)
(Alarm output, High/Low
(Alarm
(Alarm output,
(*1) (*3)
(*1) (*3)