Panasonic KT4R User Manual page 41

[Time Signal Output]
Time signal output activates during Time signal output ON time within the step for which step
number is set.
Time signal output ON time follows Time signal output OFF time after the program control starts.
The following program pattern shows that the temperature rises to 200
at 200 for 2 hours after Program control starts.
Step
Step SV
Step time
Time signal output (Fig. 6.2-4) is shown when set as follows.
• TS1/TS2 output step number: 2
• TS1/TS2 OFF time: 0:30
• TS1/TS2 ON time: 1:00
Step
Time signal output
Program control RUN
Time signal output is effective within the step set in [TS1/TS2 output step number].
For example, if TS1/TS2 ON time is set to "2:00" at the above, Time signal output
is turned OFF at the moment when Step 2 is completed.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
1
200
1:00
1
200
0
1:00
ON
OFF
0:30 1:00
OFF time
(Fig. 6.2-4)
2
200
2:00
2
2:00
ON time
for 1 hour, and stays