Panasonic KT4R User Manual page 122

Characters,
Factory Default
OUT2 high limit
OUT2 low limit
Overlap/Dead band
Direct/Reverse action
EV1 alarm value
High limit alarm
Low limit alarm
High/Low limits alarm
High/Low limits independent
High/Low limit range alarm
High/Low limit range
independent alarm
Process high alarm
Process low alarm
High limit with standby alarm
Low limit with standby alarm
High/Low limits with standby
High/Low limits with standby
independent alarm
EV1 high limit alarm value
EV2 alarm value
EV2 high limit alarm value
Loop break alarm time
Loop break alarm span
(*1) The placement of the decimal point follows the selection.
(*2) For DC voltage, current inputs, the input span is the same as the scaling span.
(*3) For DC voltage, current inputs, input range low (or high) limit value is the same as scaling low (or high) limit value.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Setting range: OUT2 low limit value to 100%
Setting range: 0% to OUT2 high limit value
Setting range: -200.0 to 200.0
DC voltage, current inputs: -2000 to 2000
Reverse (Heating) action
Direct (Cooling) action
Setting range: Same as those of EV1 alarm value
Setting range: Same as those of EV1 alarm value
Setting range: Same as those of EV1 alarm value
Setting range: 0 to 200 minutes
Setting range: 0 to 150
DC voltage, current inputs: 0 to 1500
Setting Item, Setting Range
( ),
(*1)
-(Input span) to Input span
-(Input span) to Input span
0 to Input span
0 to Input span
0 to Input span
0 to Input span
Input range low limit to Input range high limit
Input range low limit to Input range high limit
-(Input span) to Input span
-(Input span) to Input span
0 to Input span
0 to Input span
( ), 0.0 to 150.0 ( )
(*1)
( )
(*1) (*2)
( )
(*1) (*2)
( )
(*1) (*2)
( )
(*1) (*2)
( )
(*1) (*2)
( )
(*1) (*2)
( )
(*1) (*2)
( )
(*1) (*2)
( )
(*1) (*2)
( )
(*1) (*2)
(*1) (*3)
(*1) (*3)