Panasonic KT4R User Manual page 45

Characters,
Factory Default
[25] Step 6 SV
• Sets Step 6 SV.
• Setting range: Scaling low limit to Scaling high limit
Available only when Program control is selected in [OUT/OFF key function].
Step 6 time
[26]
• Sets Step 6 time.
• Setting range:
If
using Step 6 SV.
Available only when Program control is selected in [OUT/OFF key function].
[27] Step 6 wait value
• Sets Step 6 wait value.
• Setting range: 0 to Converted value of 20% of the input span
DC voltage, current inputs: 0 to Converted value of 20% of scaling span
Setting the value to 0 disables Wait function.
Available only when Program control is selected in [OUT/OFF key function].
[28] Step 7 SV
• Sets Step 7 SV.
• Setting range: Scaling low limit to Scaling high limit
Available only when Program control is selected in [OUT/OFF key function].
Step 7 time
[29]
• Sets Step 7 time.
• Setting range:
If
using Step 7 SV.
Available only when Program control is selected in [OUT/OFF key function].
[30] Step 7 wait value
• Sets Step 7 wait value.
• Setting range: 0 to Converted value of 20% of the input span
DC voltage, current inputs: 0 to Converted value of 20% of scaling span
Setting the value to 0 disables Wait function.
Available only when Program control is selected in [OUT/OFF key function].
(*1) The placement of the decimal point follows the selection.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Setting Item, Function, Setting Range
, or 00:00 to 99:59
is set, Step 6 time will be held, and Fixed value control will be performed
, or 00:00 to 99:59
is set, Step 7 time will be held, and Fixed value control will be performed
(*1)
(*1)
(*1)
(*1)