Panasonic KT4R User Manual page 118

Characters,
Factory Default
EV2 alarm value
High limit alarm
Low limit alarm
High/Low limits alarm
High/Low limits independent
alarm
High/Low limit range alarm
High/Low limit range
independent alarm
Process high alarm
Process low alarm
High limit with standby alarm
Low limit with standby alarm
High/Low limits with standby
alarm
High/Low limits with standby
independent alarm
EV2 high limit alarm value
EV2 alarm hysteresis
EV2 alarm delay time
EV2 alarm Energized/De-energized
TS2 output step number
TS2 OFF time
TS2 ON time
Loop break alarm time
Loop break alarm span
SV1
(*1) The placement of the decimal point follows the selection.
(*2) For DC voltage, current inputs, the input span is the same as the scaling span.
(*3) For DC voltage, current inputs, input range low (or high) limit value is the same as scaling low (or high) limit value.
(*4) Time unit follows the selection from [Step time unit].
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Setting range: Same as those of EV2 alarm value
Setting range: 0.1 to 1000.0
DC voltage, current inputs: 1 to 10000
Setting range: 0 to 10000 seconds
Energized
De-energized
Setting range: 1 to 9
Setting range: 00:00 to 99:59
Setting range: 00:00 to 99:59
Setting range: 0 to 200 minutes
Setting range: 0 to 150
DC voltage, current inputs: 0 to 1500
Setting range: Scaling low limit to Scaling high limit
Setting Item, Setting Range
-(Input span) to Input span
-(Input span) to Input span
0 to Input span
0 to Input span
0 to Input span
0 to Input span
Input range low limit to Input range high limit
Input range low limit to Input range high limit
-(Input span) to Input span
-(Input span) to Input span
0 to Input span
0 to Input span
( ),
(*4)
(*4)
( ), or 0.0 to 150.0
( )
(*1) (*2)
( )
(*1) (*2)
( )
(*1) (*2)
( )
(*1) (*2)
( )
(*1) (*2)
( )
(*1) (*2)
( )
(*1) (*2)
( )
(*1) (*2)
( )
(*1) (*2)
( )
(*1) (*2)
(*1)
( )
(*1)
(*1)
(*1) (*3)
(*1) (*3)