Configure Rules For A Basic Ip Acl - NETGEAR S350 Series User Manual

8-port gigabit ethernet smart managed pro switch
Hide thumbs Also See for S350 Series:
Table of Contents

Advertisement

S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
6.
Select the check box that is associated with the IP ACL.
7.
Click the Delete button.
The IP ACL is removed.

Configure Rules for a Basic IP ACL

You can define rules for IP-based standard ACLs (basic ACLs). The access list definition
includes rules that specify whether traffic matching the criteria is forwarded normally or
discarded.
Note:
An implicit deny all rule is included at the end of an ACL list. This
means that if an ACL is applied to a packet, and if none of the explicit
rules match, then the final implicit deny all rule applies and the packet
is dropped.
Add a Rule for a Basic IP ACL
To add a rule for a basic IP ACL:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch
on page 11.
Your web browser might display a security message, which you can ignore. For more
information, see
The login window opens.
4.
Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5.
Select Security > ACL > Advanced > IP Rules.
Access the Local Browser Interface
Manage Device Security
Change the Default IP Address of the
on page 19.
263

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs308tGs310tp

Table of Contents