Configure The Global Arp Settings - NETGEAR GC728X User Manual

Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports
For information about the information in the Routing VLANs ARP Cache table, see
ARP cache information for routing VLANs

Configure the Global ARP Settings

You can display and change the configuration settings for the ARP table.

To display or change the setting for the ARP table:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select Routing > ARP > Advanced > Global ARP Configuration.
The Global ARP Configuration page displays.
6. In the Age Time field, specify the number of seconds for an ARP entry to age out.
7. In the Response Time field, specify the number of seconds that the switch must wait for a
response to an ARP request.
8. In the Retries field, specify the maximum number of times that the switch retries an ARP
request.
9. In the Cache Size field, specify the maximum number of entries for the ARP cache.
10. Next to Dynamic Renew, select Enable to allow the ARP component to automatically
attempt to renew dynamic ARP entries when they age out.
11. Click the Apply button.
Your settings are saved.
on page 216.
Access the Switch
Configuring Routing
218
Table 60,
on page 13.