Lan Led - QUANTA QuantaGrid S31A-1U User Manual

A S
BOUT THE YSTEM
Table 9: Front Control Panel LED Behavior (Continued)
N C
AME
Fault LED Amber
HDD activity Blue
LAN1 LED Blue
LAN2 LED Blue

LAN LED

The system mainboard includes dual GbE network with GbE dedicated management port.
Each RJ45 connector has two built-in LEDs. See the following illustration and table for
details.
Table 10: RJ45 LED Description
C
ONDITION
Unplugged
1G active link
100M active link
10M active link
C
OLOR ONDITION
Critical Failure: critical fan, voltage, temperature state.
Blinking
Non-Critical Failure: non-critical fan, voltage, temperature
state, CPU thermal trip, DC off.
SEL cleared
Off
Last pending warning or error has been de-asserted.
Blinking Hard disk drive access (only on board SATA port)
Off No access (non-SAS)
On Link
Blinking LAN access (off when there is traffic)
On Link
Blinking LAN access (off when there is traffic)
Link
Figure 1-10. RJ45 LAN Connector
Off
On amber
On green
Off
D
ESCRIPTION
Activity
PIN 1
Location
L
INK
Off
Blinking green
Blinking green
Blinking green
LED S D
TATUS EFINITIONS
A
CTIVITY
1-10