QUANTA QuantaGrid S31A-1U User Manual page 109

BMC
The fields of RADIUS Settings Page are explained below.
Table 19: RADIUS Settings Page
I
TEM
RADIUS Authentication
Port
Server Address
Secret
Extended Privileges
Advanced Settings
Save
Reset
Procedure:
1. Enable the RADIUS Authentication checkbox to authenticate the RADIUS.
2. Click on Advanced Settings button. This opens the Radius Authorization window
as shown below.
For Authorization Purpose, configure the Radius user with Vendor Specific Attri-

bute in Server side.
Example:1
testadmin Auth-Type :=PAP,Cleartext-Password:="admin"
Auth-Type :=PAP, Vendor-Specific="H=4"
Example:2
testoperator Auth-Type := PAP,Cleartext-Password := "operator"
Auth-Type :=PAP, Vendor-Specific="H=3"
If you change the Vendor-Specific value in server then you should change the
same values in this page.
3. Click Save to save the changes made else click Cancel to go back to the previous
screen.
Option to enable RADIUS authentication.
The RADIUS Port number.
Note:
Default Port is 1812.
Port value ranges from 1 to 65535.
The IP address of RADIUS server.
Note:
 IP Address made of 4 numbers separated by dots as in "xxx.xxx.xxx.xxx".

Each Number ranges from 0 to 255.
 First Number must not be 0.
The Authentication Secret for RADIUS server.
Note:

This field will not allow more than 31 characters.
 Secret phrase must be at least 4 characters long.
 White space is not allowed.
This field is used to assign KVM and VMedia privilege for the user.
For setting the advanced features.
To save the settings.
To reset the modified changes.
D
ESCRIPTION
C G
ONFIGURATION ROUP
3-51