Power Subsystem; Led Status Definitions; Lan Led - QUANTA S100-L11SL User Manual

A S
BOUT THE ERVER
Power Sub-System
PSU
PSU to Mainboard Module Description
WARNING!
!
This system does not support mixing mainboard
modules other than those listed. Doing so will cause
damage to the system.
A system has two power supply units (PSU). Within the chassis
are two power distribution boards (PDB), one per PSU. Each
PSU supplies power to two mainboard modules as indicated in
the preceding illustration.
Power Supply Units by Model
M
ODEL
Short Model
2 x 1200W redundant PSU
Name
Note:
To use mainboard modules other than the models listed make
sure to contact the system dealer first and obtain authorized
approval.
PSU AC I
NPUT
110/220V

LED Status Definitions

LAN LED

The system mainboard has one I350 or 82599EN (optional)
Ethernet controller and two 1 GbE or one 10 GbE (optional)
ports. Each RJ45 connector has two built-in LEDs. See the fol-
lowing illustration and table for details.
Link
RJ45 LAN Connector
RJ45 LED Description
N
AME
OFF
Green(Right)
ON
Link LED
BLINKING
No
Green/Amber(Left)
Green
Speed LED
Amber
1-7
P S
OWER UB
Activity
PIN 1
Location
C D
ONDITION ESCRIPTION
No link
Link
Link with access
10 Mb
100 Mb
1 Gb
-S
YSTEM