Ssl - QUANTA QuantaGrid S31A-1U User Manual

BMC
Table 22: SOL Settings Page
I
TEM
Enable Serial over LAN
Channel Privilege Level Limit
Save
Advanced SOL Settings
Use this page to configure the advanced SOL settings.
Table 23: SOL Advanced Settings Page
I
TEM
Character Accumulate Interval
Character Send Threshold
Save
Cancel

SSL

The Secure Socket Layer protocol was created by Netscape to ensure secure transactions
between web servers and browsers. The protocol uses a third party, a Certificate Author-
ity (CA), to identify one end or both end of the transactions.
Using MegaRAC GUI, configure SSL certificate into the BMC. Using this, the device can be
accessed in a secured mode.
Checked=Enabled; Unchecked=Disabled.
Select the IPMI Serial over LAN minimum user privilege:
 Administrator

Operator
 User
Use this button to save your settings.
Use this button to go to advanced SOL page.
Figure 3-35. SOL Advanced Settings Page
The amount of the time that the BMC will wait before transmitting a
partial SOL character data package. 1-based 5ms increments. This value
must be from 1 to 255
The BMC will send an SOL character data package containing the char-
acters as soon as this number of characters (or greater) has been
accepted. 1-based units. This value must be from 1 to 255.
Use this button to save your settings.
Use this button to cancel your settings.
C
ONFIGURATION
D
ESCRIPTION
D
ESCRIPTION
G
ROUP
3-57