QUANTA QuantaGrid S31A-1U User Manual page 91

BMC
1. In Domain Name Service Configuration, Enable DNS Service.
Check the option Enable to enable all the DNS Service Configurations.

2. Choose the Host Configuration either Automatic or Manual.
Note:
If you choose Automatic, you need not enter the Host Name and if you choose Manual, you
need to enter the Host Name.
3. Enter the Host Name in the given field if you have chosen Manual Configuration.
4. Under Register BMC, choose the BMC's network port to register with DNS settings.
Check the option Register BMC to register with this DNS settings.

Nsupdate - Choose Nsupdate option to register with DNS server using nsup-

date ap-plication.
DHCP Client FQDN - Choose DHCP Client FQDN option to register with DNS

Server using DHCP option 81.
Hostname - Choose Hostname option to register with DNS server using DHCP

option 12.
Note:
Hostname option should be selected if the DHCP client FQDN option is not
supported by DHCP server.
5. Enable TSIG Authentication in TSIG Configuration.
The current file name will be displayed in Current TSIG private file.

To view a new one, browse and navigate to the TSIG private file.

6. In the Domain Name Configuration,
Select the Domain Settings from the drop-down list.

Enter the Domain Name in the given field if the option "Manual" is being

selected in domain settings field.
7. In the Domain Name Server Configuration,
Select the DNS Server Settings from the drop-down list.

In the IP Priority, set IPV4 or IPV6 as a top priority.

In the DNS Server1/DNS Server2/DNS Server3 field,

If the DNS Server Settings is setting to Manual mode, user needs to fill those
fields with DNS IP address manually according to IPv4 or IPv6 format. Otherwise,
if it is in non-Manual mode, DNS server IP address is assigned by DHCP server.
8. Click Save to save the entries.
9. Click Reset to reset the entries.
C G
ONFIGURATION ROUP
3-33