Mezzanine Card; Installing A Lan Mezzanine Card - QUANTA STRATOS S210 Series S210-X12RS Technical Manual

I H
NSTALLING ARDWARE

2.11 Mezzanine Card

Installing a LAN Mezzanine Card

Prerequisite: Prerequisite:
Remove the PCIe riser assembly. See Removing the
PCIe Riser Assembly on page 2-25.
1. Align the module with the screw holes on the module sup-
port plate.
Figure 2-39. ModuleAssembly Screws
2. Secure four (4) screws to the module support plate.
3. Insert the linking board into the module connector.
Figure 2-40. Linking Board and Module Connector
2-29
M C
EZZANINE ARD