QUANTA QuantaGrid S31A-1U User Manual page 113

BMC
Table 21: SMTP Settings Page (Continued)
I
TEM
SMTP Server requires
Authentication
Username
Password
Enable STARTTLS Support
Secondary SMTP Server
Save
Reset
Procedure:
1. Select the LAN Channel Number from the drop-down list.
2. Enter the Sender Address in the specified field.
3. Enter the Machine Name in the specified field.
4. In Primary SMTP Server, check Enable to enable the SMTP Support option.
Enable/disable SMTP Authentication.
Note:
SMTP Server Authentication Types supported are:
 CRAM-MD5
 LOGIN
 PLAIN
If the SMTP server does not support any one of the above authentication
types, the user will get an error message stating, "Authentication type is not
supported by SMTP Server"
The username to access SMTP Accounts.
Note:

User Name can be of length 4 to 64 alpha-numeric characters.
 It must start with an alphabet.
 Special characters ' , '(comma), ':'(colon), ';'(semicolon), ' '(space) and
'\'(backslash) are not allowed.
The password for the SMTP User Account.
Note:
 Password must be at least 4 characters long.
 White space is not allowed.

This field will not allow more than 64 characters.
Check this option to enable STARTTLS support for the SMTP Client.

SMTP CA Certificate File: File that contains the certificate of the trusted
CA certs.
 SMTP Certificate File: Client certificate filename.
 SMTP Private Key: Client private key filename.
Note:
To enable STARTTLS support, the respective SMTP support option should be
enabled.
It lists the Secondary SMTP Server configuration. It is an optional field. If the
Primary SMTP server is not working fine, then it tries with Secondary SMTP
Server configuration.
To save the new SMTP server configuration.
To reset the modified changes.
C
D
ESCRIPTION
G
ONFIGURATION ROUP
3-55