QUANTA QuantaGrid S31A-1U User Manual page 121

BMC
Table 27: User Management Page (Continued)
I
TEM
User Access
Network Privilege
SNMP Status
E-mail ID
Add User
Modify User
Delete User
Procedure:
Note:
The Free slots are denoted by "~" in all columns for the slot.
Add a new user:
1. To add a new user, select a free slot and click Add User. This opens the Add User
screen as shown in the screenshot below.
2. Enter the name of the user in the User Name field.
Note:
 User Name is a string of 4 to 16 alpha-numeric characters.
 It must start with an alphabetical character.
 It is case-sensitive.

Special characters like '-' (hyphen), '_' (underscore) and, ' . ' (dot) are allowed , but not in
the prefix and suffix.
To enable or disable the access privilege of the user.
Displays the network access privilege of the user.
Displays if the SNMP status for the user is Enabled or Disabled.
Displays e-mail address of the user.
To add a new user.
To modify an existing user.
To delete an existing user.
Figure 3-40. Add User Page
C
ONFIGURATION
D
ESCRIPTION
G
ROUP
3-63