QUANTA QuantaGrid S31A-1U User Manual page 126

BMC
Table 29: Services (Continued)
I
TEM
Interfaces
Nonsecure Port
Secure Port
Timeout
Maximum Sessions
Active Sessions
Procedure
1. Click View to view the details about the active sessions for the service.
It shows the interface in which service is running.
This port is used to configure non secure port number for the service.
- Web default port is 80
- KVM default port is 7578
- CD Media default port is 5120
- FD Media default port is 5122
- HD Media default port is 5123
- Telnet default port is 23
Note:
SSH service will not support non secure port.
If single port feature is enabled, KVM, CD Media, FD Media and HD
Media ports cannot be edited.
Used to configure secure port number for the service.
- Web default port is 443
- KVM default port is 7582
- CD Media default port is 5124
- FD Media default port is 5126
- HD Media default port is 5127
- SSH default port is 22
Note:
Telnet service will not support secure port. If single port feature is
enabled, KVM, CD Media, FD Media and HD Media ports cannot be
edited.
Displays the session timeout value of the service. For Web, user can con-
figure the session timeout value.
Note:
- Web timeout value ranges from 300 to 1800 seconds.
- KVM timeout value ranges from 300 to 1800 seconds.
- SSH and Telnet timeout value ranges from 60 to 1800 seconds.
- SSH and telnet timeout value should be in multiples of 60 seconds.
- SSH and telnet service will be using the shared timeout value.
If you configure SSH timeout value, it will be applied to telnet service
also and vice versa.
- If KVM is launched then the web session timeout will not take effect.
Displays the maximum number of allowed sessions for the service.
To view the current active sessions for the service.
C
ONFIGURATION
D
ESCRIPTION
G
ROUP
3-68