Bios Update; Log Out; User Privilege - QUANTA QuantaGrid S31A-1U User Manual

BMC
The device will reset if update is canceled. The device will also reset upon
successful completion of firmware update.

BIOS Update

This page allow user to update BIOS image, but only works when DC is off. Please note the
filename extension of BIOS image shall be *.bin. For example: BIOS3A22.bin. After BIOS
update complete, system must perform AC cycle to take effect.

Log Out

To log out of the MegaRAC GUI, click the logout link on the top right corner of the screen.

User Privilege

Below table describes user privilege definition and the main different features.
Table 39: User Privilege Definition
U P
SER RIVILEGE
Administrator
Operator
OEM
User/Callback
Note:
Command privilege level table defined in IPMI 2.0 Specification Appendix G –
Command Assignments. According to IPMI 2.0 Specification, Chassis Iden-
tify command is allowed for Operator privilege. Because this command didn't
Figure 3-56. BIOS Update Page
All Web-UI functions are allowed.
Only allow to view all Web-UI functions.
Only allow to view all Web-UI functions.
But Users, DNS, Network and PEF are not allowed to be viewed.
Support for ipmitool, not for Web-UI.
D
EFINITION
L O
OG UT
3-96