QUANTA QuantaGrid S31A-1U User Manual page 105

BMC
3. Policy Entry # is a read-only field.
4. Select the Policy Number from the list.
5. In the Policy Configuration field, check Enable if you wish to enable the policy set-
tings.
6. In the Policy Set field, choose any of the Policy set from the list.
7. In the Channel Number field, choose particular channel from the available channel
list.
8. In the Destination Selector field, choose particular destination from the config-
ured destination list.
Note:
LAN Destination has to be configured under Configuration -> PEF -> LAN Destination. That
is if you select the number 4 for destination selector in Alert Policy Entry page, then you have
to configure the 4th slot (LAN Destination Number 4) in the LAN Destination tab.
9. In the Alert String field, enable the check box if the Alert policy entry is Event Spe-
cific.
10. In the Alert String Key field, choose any one value that is used to look up the Alert
String to send for this Alert Policy entry.
11. Click Add to save the new alert policy and return to Alert Policy list.
12. Click Cancel to cancel the modification and return to Alert Policy list.
13. In the Alert Policy Page, to modify a configuration, select the slot to be modified
and click Modify.
14. In the Alert Policy Page, to delete a configuration, select the slot and click Delete.
C G
ONFIGURATION ROUP
3-47