QUANTA QuantaGrid S31A-1U User Manual page 148

BMC
option to preserve configuration will be presented. Enable it, if you wish to preserve con-
figured settings through the upgrade.
WARNING!
!
Please note that after entering update mode widgets, other web pages and services will not
work. All open widgets will be closed automatically. If upgrade process is cancelled in the mid-
dle of the wizard, the device will be reset.
Note:
The firmware upgrade process is a crucial operation. Make sure that the chances of a power or
connectivity loss are minimal when performing this operation.
Once you enter into Update Mode and choose to cancel the firmware flash operation, the Meg-
®
aRAC card must be reset. This means that you must close the Internet browser and log back
onto the MegaRAC
To open Firmware Update page, click Firmware Update > Firmware Update from the
main menu. A sample screenshot of Firmware Update Page is shown in the screenshot
below.
The types of Firmware Update are as follows.
HPM

AMI

HPM
This wizard takes you through the process of HPM based firmware upgrade.
®
card before you can perform any other types of operations.
Figure 3-55. Firmware Update Page
F U
IRMWARE PDATE
3-90