QUANTA QuantaGrid S31A-1U User Manual page 85

BMC
To open Active Directory Settings page, click on Configuration > Active Directory from
the main menu. A sample screenshot of Active Directory Settings Page is shown in the
screenshot below.
Table 10: Active Directory Settings Page
I
TEM
Advanced Settings
Role Group ID
Group Name
Group Domain
Group Privilege
Add Role Group
Modify Role Group
Delete Role Group
Figure 3-16. Active Directory Settings Page
This option is used to configure Active Directory Advanced Settings.
Options are:
Enable Active Directory Authentication,
User Domain name,
Time Out and
up to three Domain Controller Server Addresses.
The ID that identifies the role group in the Active Directory.
This name identifies the role group in Active Directory.
Note:
 Role Group Name is a string of 64 alpha-numeric characters.
 Special symbols (hyphen and underscore) are allowed.
The domain where the role group is located.
Note:
 Domain Name is a string of 255 alpha-numeric characters.
 Special symbols (hyphen and underscore) and dot are allowed.
The level of privilege to assign this role group.
To add a new role group to the device.
To modify that role group. Alternatively, double click on the configured
slot.
To delete an existing Role Group.
C
ONFIGURATION
D
ESCRIPTION
G
ROUP
3-27