Services - QUANTA QuantaGrid S31A-1U User Manual

BMC
Procedure:
1. Select the number of Floppy devices, CD/DVD devices and Hard disk devices from
the dropdown list.
Note:
Maximum of two devices can be added in Floppy, CD/DVD and Hard disk drives.
2. Enable the Local Media Support if needed.
3. Click Save to save the changes made else click Reset to reset the previously saved
values.
Note:
If there are two device panels for each device, and when you click the Connect button, then
the redirected device panel will be disabled.

Services

This page used for port setting and displays the basic information about services running
in the BMC. Only Administrator can modify the service.
To open Services page, click Configuration > Services from the menu bar. A sample
screenshot of Services Page is shown below.
The fields of Services Page are explained below.
Table 29: Services
I
TEM
Service Name
Current State
Figure 3-43. Services page
Displays service name of the selected slot (read-only).
Displays the current status of the service, either active or inactive state.
C
ONFIGURATION
D
ESCRIPTION
G
ROUP
3-67