Notes
• It is not possible to execute more than one macro at a time. Therefore, even
• During macro execution, recalling the same register again stops the macro
• Individual events stored in a macro are executed according to the settings in
• During macro execution, if you switch the control panel to macro editing
• During macro editing, pressing a button for which a macro attachment is set
To disable macro attachment settings
Press the [MCRO ATTCH ENBL] button assigned to a utility/shotbox control
block button or user preference button, turning it off.
In this state, pressing a button for which a macro attachment is set does not
execute the macro.
386
Macro Attachment Assigning
During macro execution, the button you pressed flashes.
if you simultaneously press multiple buttons for which macro attachments
are set, only one macro is executed.
being executed. Therefore, pressing twice a button for which a macro
attachment is set stops the macro being executed.
setup. If you change the settings in setup, a saved macro may not have the
expected effect.
mode, the macro being executed stops.
does not execute the macro.