Sony DVS-9000SF User Manual page 144

• During file playback, to play the next keyframe at variable speed, for the next
• When using a disk recorder with the VTR/disk recorder timeline, if you carry
• Some operating limitations apply when the video disk communications
144
Control of VTRs and Disk Recorders
keyframe set variable speed only, and do not set the start point (see figure
below).
Playback
KF1
a) In keyframe 2, set variable speed only, and do not set the start point.
out the following sequence of operations, the system may freeze on the frame
of the start point.
1. Press the [RUN] button to play to a point close to the end of a file.
2. Stop playback.
3. Press the [RUN] button once more.
In such cases, first recall a different register, then carry out the following
sequence:
1. Recall the original register again.
2. Press the [REWIND] button.
3. Press the [RUN] button.
protocol is used. These are explained with reference to the following figure,
which illustrates creation of a timeline that plays from the video of file A to
the video of file B.
A
KF1
– Operation with no problems:
KF1 action setting
Start
– Black video or still image appears momentarily when play switches from
file A to file B:
KF1 action setting
Start
Playback at set variable speed
a)
KF2
B
KF2
Operating status of file
A
Playing
Operating status of file
A
Playing
KF3
KF2 action setting
Start
KF2 action setting
Cueup