Sony DVS-9000SF User Manual page 62

2
Applying the Time Strobe effect
Use the following procedure.
1
2
3
Applying the Film effect
Use the following procedure.
1
2
62
DME Special Effect Operations
Frame: Freeze one frame of signal.
Field 1: Freeze the first field of signal.
Note
During the execution of a freeze, you cannot change the freeze timing.
In the <Freeze> group, press [Hard Freeze], turning it on.
The Hard Freeze is executed, displaying a still image.
In the <Freeze Timing> group, select the signal freeze timing.
Frame: Freeze one frame of signal.
Field 1: Freeze the first field of signal.
Note
During the execution of a freeze, you cannot change the freeze timing.
In the <Freeze> group, press [Time Strobe], turning it on.
The Time Strobe freeze is enabled. You can adjust the freeze interval and
the ratio of live video inserted between freeze images.
Set the parameters.
Knob Parameter
1 Duration
2 Live
In the <Freeze> group, press [Film], turning it on.
The Film freeze is enabled. You can adjust the ratio of frame advance.
Set the parameters.
Knob Parameter
1 Film
Adjustment
Freeze interval
Ratio of live video inserted
between freeze images
Adjustment
Ratio of frame advance
Setting values
1 to 255 (frames)
0.00 to 100.00
Setting values
0.00 to 100.00