Sony DVS-9000SF User Manual page 64

To turn an effect off
In the setting menu, press the button for the effect name, turning it off, or in the
Type menu press [OFF] in the lower right part of the window.
Wave settings
The Wave effect produces a wave-like effect in the image.
To apply the Wave effect
With the Wave menu displayed, use the following procedure.
1
64
DME Special Effect Operations
Name Effect
Page Turn Turns the image like a turning page.
Roll Rolls the image up.
Cylinder Winds the whole image onto a cylinder.
Sphere Winds the whole image onto a sphere.
Explosion Divides the image into fragments which expand as they
fly out.
Swirl Swirls the image.
Melt Melts the image away from a specified part.
Character Extends the edge of the image like a trail.
Trail
Notes
• It is not possible to apply two or more nonlinear effects at the same time.
Turning any nonlinear effect on automatically turns all other nonlinear
effects off.
• The Flex Shadow function cannot be enabled when any of the nonlinear
effects Page Turn, Roll, Cylinder, and Sphere is enabled.
In the <Mode> group, select the wave modulation mode.
H&V: Modulate vertically and horizontally without changing the size of
the image. This mode allows waves to be created in both the vertical
and horizontal directions at the same time.
SIZE: Create waves by reducing and expanding the image. This mode
allows waves to be created in one direction only.
See
page 83
page 85
page 85
page 85
page 85
page 87
page 88
page 89