Sony DVS-9000SF User Manual page 454

a) This occurs if the User Region Config state is different for save and load. Make the User Region
Error messages displayed when an error is detected by the
control panel
When one of the following messages (except messages a) and b)) appears, load
or save the data again. If the message still appears, contact your Sony service
representative.
Message
ERROR: NOT SUPPORTED
ERROR: DESTINATION NG
ERROR: OUT OF MEMORY
ERROR: ILLEGAL BLOCK ID
ERROR: CANNOT PROCESS
ERROR: CLF CHECK SUM ERROR
ERROR: SEQUENCE ERROR
ERROR: OUT OF BUFFER
ERROR: PACKET FORMAT NG
ERROR: UPLOAD DATA SIZE OVER
ERROR: CANNOT CREATE HEADER
ERROR: INVALID REG NO
ERROR: DOWNLOAD FILE SIZE OVER
ERROR: INVALID VERSION
ERROR: INVALID FORMAT
ERROR: INVALID MODEL
ERROR: INVALID CATEGORY
ERROR: WRONG FILE SIZE
ERROR: UNCOMPRESS ERROR
ERROR: CHECK SUM ERROR
ERROR: BROKEN DATA
ERROR: LOCK REGISTER
a) This occurs if a problem in the data makes normal load or save operation impossible. Either
b) This appears if an attempt is made to load from a locked register. Release the lock, and repeat
454
Error Messages
Config the same as when the data was saved before carrying out a load operation.
a)
create the register data again, or resave.
the load.
a)
a)
b)