Note
When key borders are enabled, the Glow function (see page 58) is not
available.
3
Set the following parameters.
Knob
1
2
3
4
5
4
To set the key border color, press [Flat Color] and adjust the following
parameters.
Knob
1
2
3
To select an outline only key
Press [Outline], turning it on.
The outline only effect is enabled.
Art Edge Settings
This effect adds edges to the inside and outside of the input picture.
Applying art edges
Use the following procedure.
1
In the DME menu, select VF1 'Edge' and HF4 'Art Edge.'
The Art Edge menu appears.
Parameter
Adjustment
H
Simultaneously adjust width of left
and right key borders
V
Simultaneously adjust width of top
and bottom key borders
All
Simultaneously adjust width of all
four key borders
Soft
Softness of the key borders
Density
Density of the key borders
Parameter
Adjustment
Luminance
Luminance
Saturation
Saturation
Hue
Hue
Setting values
0.00 to 100.00
0.00 to 100.00
Value of H shown
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
DME Special Effect Operations
31