Preparations - Sony DVS-9000SF User Manual

Preparations

Note
To use the color corrector, the BZS-9420 Color Corrector Software is required.
To use the software, you need to obtain a further installation key.
For details on obtaining an installation key, see "Making settings required to
use the software" in Chapter 16 (page 241).
Assigning the color corrector input buses to AUX delegation
buttons
There are two inputs for capturing material to the color corrector: the CCR1
bus and the CCR2 bus.
For details of the input assignment operation, see "Auxiliary Bus Control
Block Settings (Aux Assign Menu)" (page 262).
Selecting the color correction input signal
After assigning CCR1 and CCR2 to AUX buses, use the following procedure.
1
2
Selecting the color corrector output signal
By assigning the signal output from the color corrector to a cross-point button,
you can make that signal available on that button.
For details of the assignment process, see "Cross-Point Settings (Xpt Assign
Menu)" (page 257).
Accessing the CCR menu
For color correction operations, use the CCR menu.
388
Preparations
In the auxiliary bus control block, press the AUX delegation buttons
assigned to CCR1 (or CCR2).
In the cross-point button row, select the signal to which you want to apply
color correction.
Note
The signals you can select on the CCR1 and CCR2 buses are limited to the
primary inputs and frame memory outputs (FM1 to FM8).