Sony DVS-9000SF User Manual page 70

Knob
1
2
3
4
5
Knob
1
3
5
a) Set when Lock is on.
b) Set when Lock is off.
To stop the waves
Press [Lock], turning it on.
With each press, the waves alternately stop and start moving again.
To select the waveform
Press [Form] and set the following parameters.
Knob
1
2
a) 1 (SINE): Sine wave
2 (PARABOLA): Parabola wave
3 (TRIANGLE): Triangular wave
4 (RECTANGLE): Rectangular wave
5 (CIRCLE): Circular wave
6 (CUBIC): Cubic wave
Ripple settings
Applies an effect like ripples moving across the image.
To apply the Ripple effect
With the Ripple menu displayed, use the following procedure.
70
DME Special Effect Operations
Parameter group [1/2]
Parameter Adjustment
Amp V Amplitude of twist in vertical direction 0.00 to 100.00
Freq V Frequency of twist in vertical direction 0.00 to 100.00
a) Amount of movement in twist phase
Offset V
in the vertical direction
b) Speed and direction of twist
Speed V
movement in vertical direction
Slant Slant of twist
Parameter group [2/2]
Parameter Adjustment
Amp H Amplitude of twist in horizontal
direction
a) Amount of movement in twist phase
Offset H
in the horizontal direction
Slant Slant of twist
Parameter Adjustment
Form H Waveform in horizontal direction
Form V Waveform in vertical direction
Setting values
–16.00 to +16.00
–100.00 to +100.00
–8.000 to +8.000
Setting values
0.00 to 100.00
–100.00 to +100.00
–8.000 to +8.000
Setting values
a)
1 to 6
a)
1 to 6